Centrifugal Horizontal Slurry Pums Introduction:
one. HS series slurry pump is made for the ongoing pumping of high abrasive, higher density slurries with minimum upkeep needs. The sporting elements are created of extremely chrome alloy or rubber. It will sustain substantial effectiveness over the put on lifestyle of its parts.
two. The metallic wet components and rubber types can be interchangeable for handling different liquids or slurries.
three. HS slurry pumps are obtainable in measurements ranging from 1 inch to eighteen inch discharge and function high efficiency overall performance capable of movement charges from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for high head types.
4. Polyurethane Elements can be interchangeable with rubber kinds.
Attributes:
one. Cylindrical construction of bearing assembly: convenient to adjust the room between impeller and front liner
and can beremoved completely
2. Interchangeable anti-abrasive wet elements created of high-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher running pressure abilities
and an extra evaluate of safety.
four. The discharge department can be oriented to any eight positions at the interval of forty five levels
5. Different push sorts: DC(immediate connection), V-belt generate, gear box reducer, hydraulic couplings, VFD,
SCR management, and so on
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Standard Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Sector | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Product | Max Electrical power (Kw) |
Inlet & Outlet size (inch) | Materials for Put on Areas | Flow Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/1 | M | 12.6~28.eight | three.five~8 | six~68 | 1200~3800 | 152 |
| R | ten.eight~twenty five.2 | three~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.4~seventy two | nine~twenty | 6~58 | 1200~3200 | 184 |
| R | 25.two~fifty four | seven~15 | 5.five~forty one | a thousand~2600 | 178 | |||
| 50HS-C | thirty | three/two | M | 39.six~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/3 | M | 86.4~198 | 24~fifty five | 9~52 | 1000~2200 | 245 |
| R | 79.two~one hundred eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/four | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~ninety | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/6 | M | 360~828 | one hundred~230 | 10~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~two hundred | seven~49 | 400~a thousand | 510 | |||
| 200MS-E | one hundred twenty | ten/8 | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | 170~380 | 11~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | twelve~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | seven hundred~1500 | thirteen~57 | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.five/1 | M | 16.two~34.two | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | 68.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/3 | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | 90~two hundred | 30~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 20~94 | five hundred~1000 | 711 |
For the content of donning components,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Welcome to speak to us 7×24 for far more information.
Any of your inquiry or advice will get our prompt focus and response !
