Coal Slurry Pump (16/14 St-Ah)
Naipu® factory of slurry pump , gravel sand pump , dredging pump and CZPT. Naipu can be your china factory. Welcome to make contact with me for catalogue.
ZJ Coal Slurry Pump
Design Explanation
16×14 ST-AH-NP
16: Intake diameter (inch)
fourteen: Discharge measurement (inch)
B: Frame sort with optimum electrical power
NP: HangCZPT NaiPu Pump Co., Ltd.
ZJ(R) / ZJM/ZJH Slurry Pump Functionality Parameters
Sort | Allowable Mating Max. Energy(Kw) | Very clear H2o Efficiency | Impeller | ||||||
Content | Capability/Q m³/hr | Head/m | peed rpm |
Max Eff% | NPSH/m | Nos of Vane | Impeller Diameter/ mm |
||
one.5/one-NP-AH | fifteen | M |
twelve.6–28.eight | six–68 | 1200–3800 | forty | 2–4 | five | 152 |
R | ten.eight-twenty five.2 | seven-fifty two | 1400-3400 | 35 | 3 | ||||
2X1.5-NP-AH | 15 | M | 32.4–seventy two | 6–58 | 1200–3200 | forty five | three.5–eight | 5 | 184 |
R | 25.two-54 | 5.five-forty one | a thousand-2600 | fifty | 2.5-five | 178 | |||
3X2-NP-AH | thirty | M | 39.six–86.four | twelve–sixty four | 1300–2700 | 55 | 4–6 | 5 | 214 |
R | 36-75.six | 13-39 | 1300-2100 | fifty five | two-4 | 213 | |||
4X3-NP-AH | thirty | M | 86.4–198 | 9–fifty two | 1000–2200 | 71 | 4–six | 5 | 245 |
R | 79.two-a hundred and eighty | five-34.five | 800-1800 | fifty nine | 3-five | ||||
6X4-NP-AH | 60 | M | 162–360 | twelve–56 | 800–1550 | sixty five | five–eight | five | 365 |
R | one hundred forty four-324 | twelve-45 | 800-1350 | sixty five | 3-5 | ||||
8X6-NP-AH | 300 | M | 360–828 | ten–61 | five hundred–1140 | 72 | two–nine | five | 510 |
R | 324-720 | seven-forty nine | four hundred-1000 | sixty five | five-ten | ||||
10X8-NP-AH | 560 | M | 612–1368 | 11–61 | 400–850 | seventy one | 4–ten | five | 686 |
R | 540-1188 | twelve-50 | four hundred-750 | 75 | four-twelve | ||||
12X10-NP-AH | 560 | M | 936–1980 | 7–sixty eight | 300–800 | 82 | six | 5 | 762 |
R | 720-1620 | 7-forty five | three hundred-650 | eighty | two.5-7.5 | ||||
14X12-NP-AH | 560 | M | 1260–2772 | 13–sixty three | 300–600 | 77 | 3–10 | five | 965 |
R | 1152-2520 | thirteen-forty four | 300-five hundred | 79 | 3-8 | ||||
16X14-NP-AH | 1200 | M | 1368–3060 | 11–sixty three | 250–550 | 79 | four–ten | five | 1067 |
20X18-NP-AH | 1200 | M | 2520–5400 | 13–fifty seven | 200–four hundred | eighty five | five–10 | 5 | 1370 |
Feature
Sort ZJR, ZJM, ZJH Pump are cantilevered, horizontal, centrifugal slurry pump. They are made for the handing higher density slurries in the metallurgical, mining , coal, energy, constructing substance and other industrial department and many others.
The body plates liner and impeller for variety ZJR , ZJ(M) pumps have replaceable wear-resistant metallic liners or rubber liners.
The shaft seals for sort ZJ(R),ZJM, and ZJH Pump may possibly be adoptable of gland seal , expeller seal or Mechanical seal .
The discharge department can be positioned at intervals of 45 levels by request and oriented to any 8 positions to go well with installations and apps.
Bearing assembly use cylindrical structure, which will help adjust the space amongst impeller and go over plate liner easily, and becoming taken out totally when getting fixed. Bearings use grease lubrication. Listed here are the generate types, such as V belt generate, equipment reducer drive, fluid coupling travel, and frequency conversion travel products.
Vast overall performance, good NPSH and higher performance, the pump of this kind might be installed in multistage sequence to meet the shipping and delivery for long length.
Application
ZJR, ZJM, ZJH pumps are using for handing robust abrasive, large density slurries and lower density, higher head slurries in the metallurgical, mining, coal, electricity, building material and other industrial departments and so forth.
For example: Coal washery processing, handling with the wonderful ore and tailings in metal mine, handing mixed base and fly ash in a thermal energy station.
Standard Application
Ball mill discharge | Base/fly ash, lime grinding | Coal | Coarse sand |
Coarse tailings | Dredging | FGD | Good tailings |
Flotation | Hefty media | Minerals concentrate | Mineral sands |
Ni acid slurry | Oil sands | Phosphoric acid | Phosphate matrix |
Method chemical | Pulp and paper | Rod mill discharge | SAG mill discharge |
Soaked crushers | Alumina | Copper | Molybdenum |
Iron Ore | Gold | CZPT &zinc | Silver |
Bauxite | CZPTium | Steel | Sand & Gravel |
Slurry Pump Simple Element No. | Materials Code | Part Identify |
147 | A05,A07,A49, R26,R08,R55,R33…. | Impeller |
001 | E62 | Adjusting Screw |
003 | G01 | Base |
004 | G01 | Bearing Housing |
005 | Bearing Assembly | |
009 | Bearing | |
011 | E62 | Clamp Washer |
013 | D20 | Include Plate |
015 | E62 | Include Plate Bolt |
017 | R26A R08, R55, R33 ,S21, S42,S31… | Go over Plate Liner |
018 | R26A R08, R55, R33 ,S21, S42,S31… | Go over Plate Liner |
571 | E62 | Finish Cover |
571 | G01,A05, C23 | Expeller |
571 | G01,A05, C23 | Expeller Ring |
571R | R08, R26,R55,R33 | Expeller Ring (Rubber) |
032 | D20 | Body Plate |
034 | E62 | Body Plate Bolt |
036 | R26A R08, R55, R33 ,S21, S42,S31… | Frame Plate Liner |
039 | E63 | Frame Plate Stud |
041 | A05,A07, A49, R26,R08,R55,R33….. | Body Plate Liner Insert |
044 | G01, K24,C23 | Gland Assembly |
060 | Rubber | Consumption Joint |
062 | G01 | Labyrinth |
063 | 1Cr18Ni9Ti | Lantern Ring |
064 | Rubber | Impeller O Ring |
067 | E62 | Neck Ring |
070 | E05 | Shaft Important |
073 | E05 | Shaft |
075 | D20 | Shaft Sleeve |
076 | D20 | Shaft Sleeve(Lengthy) |
078 | G01, A05 | Stuffing Box |
081 | E02 | Keeper Plate |
083 | A05,R26A | Throat Bush |
085 | E02 | Cotter |
090 | S10 | Lip Seal |
109 | Rubber | Shaft O Ring |
one hundred ten | A05,A07,A49 | Volute Liner |
111 | Q05 | Packing |
117 | E62 | Shaft Spacer |
118 | 1Cr18Ni9Ti | Lantern Restrictor |
122 | Rubber | Expeller Ring/ Stuffing Box Seal |
124 | Rubber | Volute liner Seal |
one hundred twenty five | Rubber | Volute Frame Seal |
132 | Rubber | Discharge Joint Ring |
138 | E62 | Grease Cup Adaptor |
217 | Rubber | Impeller O Ring |
239 | C23 | Impeller Release Collar |
Organization Profile
ShiJiazhuang Naipu Pump Co.,Ltd is CZPTized in the company and sales of slurry pump and pump elements, especially the design and manufacture of merchandise manufactured with higher abrasive, anti corrosive substance, like AH(R), M(R), HH, SP(R),AF(R) G, Sequence Slurry pump, ZJG, ZG Sequence slurry pump, WS(G)Collection Dredging Pump, ZJQ Submersible Slurry Pump,TL(R) Desulphurization pump and PNJ Sequence Slurry pump.
In addition , we also can undertake OEM buy for forged& froged parts
Contemplating numerous requirement for substance in the market, we can offer soaked end element substance as subsequent, steel materials A05,A07,A12,A33,A49,A61 and and many others. Rubber material R08, R26, R33,R55, S01, S12, S21, S31, S42 and and so on. Presented customer’s special request for abrasion and erosion in pumping environments, we can supply the materials in accordance to customer’s content method or sample to meet your want.
The Merchandise are broadly used in mining , power, metallurgy, coal , dredging, developing substance and other industrial strains to pump concentrate, tailing , sludge, and other abrasive high density slurries.
NaiPu Principal Pump Design
AH sequence |
L(R) ,M |
HH |
SP(R) |
G |
AF Collection |
one.five/1B-AH(R) |
20A-L |
1.five/1 C-HH |
40PV-SP(R) |
six/4D-G |
2QV-AF |
two/one.5B-AH(R) |
50B-L(R) |
3/Second-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
three/2C-AH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
ten/8F-G |
6SV-AF |
4/3C-AH(R) |
one hundred D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
six/4D-AH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
|
6/4E-AH(R) |
300S-L |
6/4X-HH |
250TV-SP |
fourteen/12G-G |
|
8/6E-AH(R) |
ten/8 R-M |
6S-H |
|
fourteen/12T-G |
|
eight/6R-AH(R) |
ten/eight E-M |
eight/6S-H |
|
16/fourteen G-G |
|
ten/8F-AH(R) |
|
8/6X-H |
|
sixteen/14TU-GH |
|
10/8X-AH(R) |
|
6S-HP |
|
16/14H-GH |
|
12/10ST-AH(R) |
|
8/6S-HP |
|
eighteen/16G-G |
|
fourteen/12ST-AH(R) |
|
8/6X-HP |
|
eighteen/16 TU-GH |
|
sixteen/14TU-AH(R) |
|
|
|
|
|
Our Services
1. Quick Reply
Your inquiry associated to our merchandise or charges will be
replied inside 12 hours.
2.Pump Option .
We can aid to select the suited pump
3.Technological Surport .
We have a group of substantial good quality technicians with rich experience who can resolve everything during the complete method.
four.Ensure good quality.
All the products have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly just before delivery.
five.CZPT right after -sales .
We will be dependable for the total existence period
6.OEM buy.A lot of content are available ,like Large chrome, rubber , stainless steel and etc.Steely alloy.
Welcome to contact us
ShiJiaZhuang NaiPu Pump Co.,Ltd
Speak to particular person :Kitty Liu
/Mobile :-1303265716
HangCZPT, Headquarters
Insert.:No.368, Xihu (West Lake) Dis. North Highway, HangCZPT, ZheCZPT Province, CZPT